Best Routes for CB Antenna Cable

Facebooktwittergoogle_plusredditpinterestlinkedinmailby feather

CB antenna installation is one of the most important processes involved in getting your CB system on the right track. For that, you require the best and a super-efficient CB antenna and a few set of professional guidelines for a quick and easy setup of your antenna.

Stryker has got the most outclass CB antennas lined up for you in its two state-of-the-art categories called SR-2K and SR-5K. They have got the best of the best magnetic mounts that are easy to install and manage while adding an unmatchable range to your CB radio. The Stryker expert staff is also available 24/7 for easing your way towards the finest CB installation anywhere you want.

routing cb cable

Stryker experts suggest that each and every process involved in the CB antenna installation holds a pivotal role as a whole. One of them is the determination of the right location for mounting your CB antenna and fixing the route for the cable in the most inconspicuous way possible. Before that, they advise to tune and test every component of your CB system before turning everything as a system together. The antenna should be tuned and calibrated first and then its cable should be fixed in place so that you don’t have to disturb the setting repeatedly.

After gaining the profound experience of many years in the CB industry, the Stryker experts suggest some of the best routes for your CB antenna cable that would adjust with the overall setting of your CB system quite easily. They are:

1-The grommets in the vehicle (passenger side, pax side, brake light etc.)

2-Vents behind the spare (if any)

3-Tailgate

These options depend on how you want to set your cable around your system. Each has its own pros and cons that need to be weighed relatively so that you can finalize which route is the most suitable for your CB antenna cable. Points like tailgate often result into leakage through your car but you can prevent that issue by sealing the holes with silicone after passing the cable through them.

After considering all the possible points, it might sound difficult for the first time. Therefore, it is recommended that you should ask the Stryker experts to help you out with what your CB installation actually needs and learn things for doing them yourself the next time. It would help to ensure the best CB experience without any messy looks created around you.

Facebooktwittergoogle_plusredditpinterestlinkedinmailby feather

Get more stuff like this

Subscribe to our mailing list and get interesting stuff and updates to your email inbox.

Leave a Reply

Your email address will not be published. Required fields are marked *