CB Antenna Installation for Pickup Trucks

Facebooktwittergoogle_plusredditpinterestlinkedinmailby feather

CB radio is a versatile device that provides connectivity for all kinds of vehicles, either on-road or off-road. But generally, the best vehicle that complements the main idea of CB radios is a pickup truck. The vehicle provides plenty of space and options for an ideal CB antenna installation Moreover, the CB radios perfectly fit into the conventional look of the pickup trucks, making them look more up-to-date.

Installing a CB radio inside a pickup truck is very easy and quite fun if you do it in an organized manner. The following considerations can make your CB installation worth all your efforts:

  1. Buy your CB equipment only from the CB brand that has a good reputation in the market and is known to deliver quality through its products.
  2. Select the longer CB antennas for your CB system. They transmit better than the shorter ones.
  3. Make sure you mount the antenna on the highest point of your vehicle and ground it properly with a wide metal ground plane underneath.

Best locations for CB Antenna Installation

For getting the most optimal performance from your CB antenna, it is very important you should buy the best cb antenna & that you mount your antenna at a carefully selected location. This location will decide what range your CB system would have and how clearly you would be able to communicate through it. Following locations are considered most ideal for CB Antenna mount

1. Tool Box

This location is a unique one but a very effective one for mounting your CB antenna. It is generally preferred when mounting a fiberglass antenna on the vehicle. Special 3-way mounts are used during this process. For better results and clearer transmissions, such an installation is made with a single antenna on the driver’s side so that no blockade is offered to the incoming signals. Do remember to have sufficiently longer antennas that have ½ of their body above the roof line after the mount for optimal performance.

Read : Sirio LED Performer 5000

2. Center of the Roof

If you mount your antenna at this point on your pickup, you have done half the job perfectly well. This place automatically provides a decent ground plane for mounting your antenna and it allows it to catch signals from all the directions with the same intensity. Nowadays you can mount your antenna to the roof within minutes using the amazing magnetic mounts that are especially wonderful for this purpose and had made cb antenna installation easy. Most commonly used sizes of these mounts are 3’ or 5’. For roof mounting, the routing of the cable is also very simple. The most preferred routes are the door frame or through the rear window.

Some natural mounting options on Vehicles

If you carefully examine your vehicle, you will find some unique ready-made mounts for your CB antenna installation. Some of them are as follows:

3. Hood Mounts

When you have pickup trucks or any other large vehicle where finding a simple mounting location is difficult, you can always go with the hood mounts for cb antenna installation. This includes mounting your CB antenna along the hood channel of your truck. It is usually the point where the professionals mount the CB antennas and gives a very organized look to your installation. Such mounts also support fiberglass antennas most of the times.

A guide for cb antenna installation

4. Stake Mounts

Stake hole is that point on the rear end of the cab where you can easily mount your CB antenna without any permanent drilling. These are actually small openings along the pickup truck’s bed rails and are square in shape. For a firmer installation, you can use the special mounts for this installation as well. These points support the fiberglass antennas most ideally. Rest of the conditions for the installation will remain the same i.e. installation on the driver’s side and use of a long antenna that would easily be above the roof line for efficient reception and transmission.

cb antenna for jeeps

Why bumper mounts should be avoided?

Mounting your CB antenna on a bumper means cutting its performance to half. Bumpers are known to be the least appropriate locations for mounting a CB antenna as they make the antennas hide behind the truck’s body, hence finding difficulty to catch signals. Moreover they cannot transmit their signals to the vehicles or stations around them. But if you have a 102’ long steel whip antenna, then you can consider mounting on a bumper as a last resort.

Read: A Complete Guide to SWR Meter

5. Dual CB Antenna Installation

Dual antennas are most commonly found on the pickup trucks. They provide phenomenal connectivity to the CB system and they make the truck look like something well-organized. Together these antennas can easily overcome the shortcomings that a single antenna might face and also clear the dead spots that might be caused due to signal blockade. You will feel your CB radio’s range increasing in the direction you are travelling and in the one

cb antenna installation guide

opposite to it but the signals are drastically reduced on the right and left sides. Generally these antennas are not very reasonable for the pickup trucks and also provide average results as compared to the single antennas.

Types of CB Antennas

1. Magnet Mount Antennas

Magnetic Mounts had made cb antenna installation easy and quick. These are the easiest antennas to mount on your vehicle. You just have to take the magnet mount, coax and the antenna whip out of the box, get everything assembled and make it stick to the roof of your vehicle. That’s it! After careful tuning, your antenna is ready to go. These mounts are generally preferred for the base-loaded antennas and can be used for any type of vehicle. Best Magnetic  Mount Antennas available are:

  1. Sirio 5000 LED Performer.
  2. SR-5k CB Antenna.
  3. K-40 CB Antenna.

2. Center Loaded CB Antennas

These antennas are generally very good for heavy vehicles like pickup trucks. These antennas are recognized by their central plastic housing and coil placement in the middle. They are also versatile in terms of that they have the same
universal thread used for connecting to any kind of antenna mount. Center-loaded antennas are more preferable to be mounted on those trucks that are used for normal routine trips on highways but should be avoided for the heavy vehicles that undergo a rough usage during their journeys. These antennas are very easily breakable yet they are very expensive because of their higher power handling capacity.

3. Fiber Glass CB Antennas

These antennas are very versatile and flexible and they deliver the most efficient performance with great consistency. They can be mounted on all the unique mounting locations we have mentioned above. What makes it versatile is its universal 3/8″ x 24 thread that will easily connect to any kind of mount and get anchored to any mounting location you are considering. They gave best options for cb antenna installation.

4. 102″ Whips

These antennas top them all in terms of their efficiency and performance because they have the best length that solves all the connectivity issues in one go. These antennas are complemented well by the ball mounts, dome mounts or the 3-way mounts. These antennas, however, are very difficult to manage because of their massive size and weight.

Facebooktwittergoogle_plusredditpinterestlinkedinmailby feather

Get more stuff like this

Subscribe to our mailing list and get interesting stuff and updates to your email inbox.

Leave a Reply

Your email address will not be published. Required fields are marked *